Autumn floor waxing The most suitable floor waxing 5 steps
Fall is coming. This is the best time to wax the wooden floor. Just as human skin needs maintenance, the wood floors used at home also need to be repaired and treated regularly. Therefore, floor waxing is an indispensable method, so as to extend the life of the floor. Wax floor wood should pay attention to what? 5 steps to teach you to solve the wood floor waxing problem. Waxing on the floor is no longer a burden. 1, waxing environment preparation The best choice for floor waxing is when the weather is better, such as this cool autumn day. To avoid construction when the humidity is high on rainy days and when the temperature is low, excessively high humidity tends to cause white turbidity, and when the temperature is lower than 5 degrees Celsius, floor waxes tend to harden, which is not conducive to construction. 2, construction tools and floor wax preparation Large area waxing often use waxing machine, small area is the use of dust or soft cloth. Now many people also have smaller, lighter weight waxers that can be easily used when waxing. If you do not have a waxing machine, you can use a simple tool such as dust and soft cloth. Do not look at the tool is simple, but the waxing effect is not necessarily poor, but may be more detailed. In addition, the corresponding floor wax must be prepared. 3, clean the ground Before you start waxing, you need to arrange the furniture that needs to be waxed and determine the waxing area. At the same time, the floor area should be cleaned to ensure that there is no dust or other dirt before waxing to prevent waxing. Cleaning generally uses a wrung mop or a soft cloth to wipe the floor. After cleaning, it is necessary to wait until the water on the floor is completely dry before waxing. 4, waxing Shake the container with the floor wax and stir it evenly. Use a clean rag or sponge to fully dip the floor wax so that it does not drip. Shake and mix evenly the floor wax. You can perform partial trials in unobtrusive places and confirm that there is no abnormality before waxing. Then use a clean rag or special waxing dust to fully dip the wood floor wax and carefully apply it in the direction of the wood grain of the wooden floor. The speed should not be too fast. Do not apply paint or uneven thickness and keep it thin and even. 5, polishing It is generally used twice, after the first pass, and then again. Each time the wax is applied, it must wait for a layer of wax to dry before it can be applied with a layer of wax. After completely drying, polish the surface with a fine sandpaper or a soft cloth. Related content Recommended reading: Strengthen the floor maintenance and pay attention to small details in daily life 14 small tips for floor maintenance How to choose and care for oak flooring Tips: If you want to know more about the floor, you can pay attention to the information of this website or go to this website to find more floor products! Flooring Flooring Flooring Maintenance Furniture The LED tubes emergency kit is making your LED tubes into Emergency Mode, ideal for LED tubes 3-40W Full power emergency output wattage for LED emergency lighting 60-180mins. Automatic lighting up when main power failures. Suitable for LED fitting with external led driver and internal driver. Widely using for parking lot, office, building, warehouse, school, hospital, workshop etc. Emergency Led Tube,Led Tubes Emergency,Led Tubes Emergency Kit,led tube light with battery Foshan Nai An Lighting Electric Co.,ltd , https://www.ledpowerpack.com