Analysis of Causes of Noise during Operation of Electric Shears

Before introducing the electric shears, let's talk about what everyone should know about the working principle of electric shears. Among them, electric shears are mainly used to cut different rules of the plane. Electric shears sometimes produce a number of different conditions when they are running to start the shears machine idle for several cycles, first of all should ensure that under normal conditions, and then try cutting different thickness sheets, from thin To thick. When trial cutting different thickness of the board must be adjusted to the different blade gap. If the corresponding blade gap is not adjusted, the blade durability is affected.

Next, we will introduce in detail the maintenance and repair methods of electric shears:
1. The smooth lining oil in the motor bearing should be changed and refilled regularly, and often check whether the local work of the electric appliance can be kept safe and secure.

2, regular inspection of the triangle belt, handles, knobs, keys can be damaged, serious wear and tear should be promptly changed, and reported spare parts added.

3, regular inspection and repair switch, insurance, handle, to ensure its reliable operation.

4. Strictly follow the operating procedures to stop the operation.

5, each time before starting the machine according to the smooth chart request timing, fixed point, quantitative plus smooth oil, oil should be clean without precipitation.

6, the machine must always adhere to clean, not paint the local anti-rust grease.

7, 10 minutes before work every day, smooth the machine tool and scrub clean the machine.

8. It is strictly forbidden for non-designated personnel to operate the equipment . Normally, it is necessary to stop people from leaving the aircraft.

Underwater Lighting

The LED underwater light is a light that is placed under the water. The appearance is small and exquisite, and the appearance is elegant. As an underwater lighting fixture, LED underwater light is widely used in various sightseeing places such as square parks. It is the perfect choice for fountains, theme parks, exhibitions, commercial and art lighting.Most of the materials are made of stainless steel and glass. The types of stainless steel are 201, 304, 316, etc.This lamp is designed with fully tempered safety glass, wide light radiation surface, strong transparency.The interior of the luminaire is highly waterproof and has a protection rating of IP68 or higher .All adopt imported high-power LED as light source, which has obvious advantages such as long life, low power consumption, pure color and no pollution. With the DMX512 control system, it can achieve a variety of color changes.If you want to know more, please contact us.

Underwater Lights,Submersible LED Lights,Underwater Boat Lights,Underwater Fishing Lights