Different materials bathtub maintenance tips
It is extremely important to buy a quality bathtub, but it is also essential and even more important to maintain the bathtub in daily use. However, many people tend to ignore this most critical point, resulting in a shorter period of use of the bathtub, so we should continue to maintain the bathtub in daily life, so that it lasts longer. However, not every type of bathtub is maintained in the same way. Baths of different materials also have different maintenance methods. If the maintenance is not proper, there may even be the opposite effect. Here, Jiuzheng Building Materials Network Xiaobian will briefly analyze the maintenance tips of different material bathtubs. Acrylic plastic bathtub Acrylic plastic bathtub is light in weight, does not rust, will not be eroded, feels warm, can maintain water temperature for a long time, and is easy to wipe clean. This bathtub is currently the mainstream product on the market. When the bathtub is being serviced, you can choose a suitable polishing machine, a 1900 rpm model wool polishing disc, apply the wax on the polishing disc, and then polish the polished part. Sandpaper repair (1000 or 1500) should be performed on the surface before grinding, and it should be repeated several times to reach the shiny surface. Polishing wax is made of high quality products. It can be polished with car. For small area, small or small, it can be manually polished. After grinding with 1500 water-resistant paper, use the surface polishing agent to repeatedly turn the circle to make the surface bright and even Toothpaste can be used instead of abrasives, but the grinding time is much longer. The surface of the large brand acrylic bathtub is specially treated, which is more resistant to abrasion than ordinary acrylic bathtubs. If the surface is accidentally scratched, if the scratch is light, use a toothpaste and a toothbrush to lightly brush it; if the scratch is deep, it is recommended to consult a professional and ask a professional maintenance person to handle it. You can use turpent water to clean the gelatin that is stained on the bathtub. Many chemicals can cause the acrylic to lose its luster, such as the water. It is usually only necessary to clean with No. 1 cleaner. Do not use corrosive detergents. Cast iron bathtub The cast iron bathtub is a very heavy and long-lasting material. The enamel on the surface is generally thinner than that on the steel bathtub. When cleaning the bathtub, the cleaning agent containing abrasive ingredients cannot be used. The disadvantage of this bathtub is that the water will quickly cool down. The shape of the cast iron bathtub is usually cumbersome (except for the high-end goods of tens of thousands), the price is expensive, and the heat preservation is not very good. But its advantage is that it has a long service life. The bathtub can be cleaned with an acid-free cleaner and a non-abrasive soft foam pad can be used to clean the dirt on the non-slip surface of the bathtub. Cast iron bathtubs are the most susceptible to scratches. If there are rust scratches, remove the rust spots with the decontamination powder, wipe with a dry cloth, and finally apply the special adhesive for the bathtub. The scratches will not enlarge. The bathtub must be cleaned with a sponge and washing powder. It cannot be brushed with a brush. Wooden tub When the barrel is shipped from the factory, a layer of tung oil is applied. Therefore, in the first few days of purchase, the air circulation of the bathroom must be kept and the window should be opened for ventilation to avoid making the home full of pungent smell. Initially, the water will see water seepage. This is a normal phenomenon. After the water is full, it should be soaked for more than 12 hours to fully infiltrate the wooden barrel. The water seepage phenomenon of the wooden barrel will stop. If there are any problems, you should contact the manufacturer in time. Because the wood itself will expand and contract, it should not be directly exposed to the sun or blown by the cold wind. If it does not need to be used for more than two months, the wooden barrel can be wetted and sealed with a large plastic bag to prevent the air from taking away moisture. When not in use, it is best to put a little water to absorb moisture and keep the wood saturated and moist, but not too much water, because the bathroom itself has a certain humidity. Pay attention to not using the dirty water after bathing, so as to prevent the wood from absorbing sewage and accelerating aging or producing mildew. After the wooden barrel is used for a period of time, the fixed wire outside the barrel will be loose. In this case, the wooden barrel can be inverted and the iron wire can be tightened. The thickness of the wood in the barrel wall will vary. Generally, the barrel with a wall thickness between 2 cm and 3 cm is selected, and the heat preservation effect is the best. Bathtub maintenance tips: 1. Clean the bathtub every week to ensure that the bathtub stays dry after each use. 2. Use a neutral liquid cleaner and a flexible cloth or a good sponge to clean the bathtub. 3. Never use worn and highly alkaline cleaning products. 4, avoid the use of dark detergent, because it is easy to cause pigment penetration into the cylinder surface. 5. After using the hose, don't forget to turn off the water system to avoid frequent dripping and water in the bathtub. 6. If there is any damage to the bathtub, the company should be notified immediately for repair so that the problem will continue to deteriorate. 7. Don't leave metal objects in the bathtub, they will make the bathtub rust and stain the surface. horse fence,High Quality horse fence,horse fence Details Hebei Giant Metal Technology Co., Ltd. , https://www.358fencing.com