Precautions when using electric hoist

(1) Before daily work, the operator should test the empty vehicle to check the working environment, electric hoist equipment itself, spreader and other unsafe factors; when not working, it is not allowed to suspend heavy objects in the air to prevent permanent deformation of the parts; Empty hooks should be hung in the air to avoid falling into the ground, and the steel ropes should be over-relaxed and arranged on the drum.
(2) It is not allowed to lift heavily loaded cargo, and it is not allowed to use the electric hoist as a dragging tool, because oblique hoisting or diagonal pulling will cause the tension of the Steel Wire rope to be greater than the weight of the hoisting cargo.
(3) The amount of axial movement of the motor has been adjusted to about 1.5 cu.s. at the time of delivery. During use, it will gradually increase with the wear of the brake ring. If a large amount of weight reduction after braking is found, it is necessary to Check and adjust the brake. After 3 times adjustment, the brake ring should be replaced to ensure braking safety.
(4) Always check the rope guides on the drum to ensure that the ropes are pressed against the drum and wound up in order. Ensure that the stopper works normally.
(5) Check the height of the lubricant regularly in the reducer, replace the lubricant as required, and ensure that the lubricant is of good quality.

Section Steel


Section steel is a section of the shape and size of the strip steel, steel is the four varieties (plate, tube, type, silk). According to the shape of section, section steel is divided into simple section steel and complex section steel. The former refers to the steel, round steel, flat steel, angle steel, six angle steel; the latter refers to the I-beam, Channel Steel, steel Square Pipe, H Beam , steel frame bending etc..


strip nosing Grade: A36, S235jr, St37-2, SS400, Q235, Q195

strip nosing Standard: ASTM, AISI, EN, DIN, JIS, GB

strip nosing Length: 6m, 9m, 12m or as your requirement.

strip nosing Technique: Hot rolled

strip nosing Place of origin: Tianjin China (Mainland)

strip nosing Brand name: Zhen Xiang

strip nosing Model number: Zhen Xiang

Free iron packaging

In order to avoid the flat bar wear to the greatest extent,we would provide free iron 

packing.Perfect packaging to ensure good quality of our products without any 

damage after arriving at customers` place.



Section steel Widely used in a variety of architectural and engineering structures, such as roof beams, bridges, transmission towers, hoisting and conveying machinery, ships, containers, Industrial furnaces, reaction towers and storage shelves etc


Section Steel

Merchant Steel, Profiled Steel, Steel Section, Channel Steel, H Beam and I Beam

TIANJIN ZHENXIANG STRIP PROCESSING CO., LTD. , http://www.zhenxiangsteel.com