Taiwan Dexinfa launched the 2008 new deformation tungsten rigid end mill

In 2008, our Taiwan Dexinfa Corporation launched a series of new deformed tungsten rigid end mills based on mold and large parts processing. To further solve the difficulty of customers processing ultra-large, ultra-deep cavity molds and parts, the new deformation tungsten rigid end mill has the following advantages:

1. The general traditional disposable cutter head is a lock blade, which has poor stability and chip removal, and cannot be made with a large depth of cut, such as 0.5D or more. Deformed tungsten rigid end mills do not have this problem.

2. The combination of the replaceable tungsten carbide cutter and the carbide cutter with the deformed tungsten steel end mill can make large and deep processing.

3. Special angle design and the latest coating technology, the processing hardness can be cut to HRC65° or above.

4. The cutter head and the knife bar are perfectly combined, the yaw amount is less than 0.02mm, the high precision, the yaw amount is small, and the tool life is relatively improved.

5. The deformed tungsten rigid end mill consists of a tungsten rigid cutter bar and a replaceable tungsten rigid milling cutter head. It can be interchanged in flat milling cutters, ball end milling cutters, round nose cutters, precision milling cutters and high hardness milling cutters. Available in sizes from 10mm to 32mm in diameter and from 100L to 300L in length, it can be replaced freely. Used in different milling operations: copy milling, square shoulder milling, cutting, slotting. The design of the threaded connection between the shank and the cutter head makes it quick and convenient to replace the cutter head. At the same time effectively reduce costs for you.

The deformed tungsten rigid end mill is a high-tech milling cutter that can be used for high-speed machining and high-hardness machining. Its material has high toughness and high hardness and has excellent wear resistance. Repeated positioning accuracy is suitable for most deep cavity machining. Nowadays, DHF tungsten rigid milling cutter is no longer a problem for CNC machining in the tool industry with its full range, reasonable price, high performance and professional technician service.