What are the basic camera settings for interior decoration photography?

In so many decoration knowledge, pick a best decoration effect and then arrange the room, you can complete the interior decoration photography, interior decoration photography, you can post similar works below the corresponding keywords, let readers view the words There is an intuitive reference for the article, and then let Xiaobian take everyone to look at the exciting content of interior decoration photography .

First, the basic camera settings

I believe that everyone can guess the camera settings from the above features, in fact, it is very simple.

Wide-angle lenses do not require ultra-extreme wide-angle lenses. In full-frame format, a 24-35mm lens is suitable.

You may wish to try the 18-55mm entry lens first. If the lens is too deformed, use a 50mm lens to shoot the parts and then merge.

Use a smaller aperture of F16 or higher to ensure that every detail is clearly visible, and of course with a slow shutter

In addition to the slow shutter of the tripod, the tripod can also check the level of the camera.

The shutter release / remote control in daylight calculations, using F18 and ISO 100 requires exposure for 10-30 seconds. If it is dusk, the sky starts to dim and it takes 45 seconds or more. It is also convenient to use the shutter with the shutter.

Second, how to decide the exposure

Since the aperture is already set, exposure is the key to decisiveness. How to determine the exposure time when facing the extreme gap between the window and the room?

This is a problem that every home will face. Sorry, based on the lack of digital tolerance, it is impossible to accommodate the window, and the exposure in the window is impossible. There are several ways to make up for this deficiency:

Use HDR to merge using three different exposures

The original intention of HDR is to make up for the lack of tolerance, but the tone does not look natural.

If you can only use one photo, prefer to have insufficient internal exposure, and try to keep the scene outside the window. Because the digital can keep the underexposed information, the overexposure will not save it. For example, the window is 1 second, the window is 20 seconds, may be exposed 8 Second, it is a little bit outside the window

The tolerance of using film film is relatively large

The author also switched to film in the late stage. In fact, it took more time and effort.

Give up natural light and use flashing lights

Combine the photos and simply go down the scene outside the window (as shown below)

Pay attention to the excessive exposure, the edge of the window frame will be blurred, you need to make corrections and carefully

When you want to pay attention to the merged photos, you can reflect the reflective places outside the window, so I have dimmed the whole photo. In addition, if the exposure time has been too long (more than 30 seconds), you are worried that the exposure is not accurate. This is unnecessary because the longer the exposure time, the less the exposure error is.

The above is the introduction of the relevant content of interior decoration photography. I hope that readers will be able to see and hear, and you will benefit from the application in real life. Ok, today's introduction to interior decoration photography is here. Thanks to readers and friends for reading this article and for their support and love for small series. If you want to get more information about home decoration, please continue to pay attention to the decoration home. network.

More related wonderful reading:

Photo studio decoration style photography studio decoration design

How to decorate the studio? Studio decoration design

Door skin is one of main products of Luli Group Co., Ltd(Mainland).Our high quality Door Skin is adopting HDF as basic material, surface laminated Natural Veneer, melamine paper or pvc.  during vacuum molding machine, the high temperature and pressure, with one or two forming technology to produce.

Advantages of Door Skin:

• Eco-environmental

• More beautiful

• More convenient

• No cracking, no deformation

Usage of Door Skin:

Luli Group Co., Ltd adopting"Prodcution line, Ecological development", has been selected and favored by more and more customers. It is mostly used as the main material of door of Kitchen, Washing Room, Baching room etc.

Kinds of Door Skin:

• One forming Door Skin

• Two forming Door Skin

• Natural Veneer Door Skin

• Melamine Door Skin

• PVC Door Skin

Details of Door Skin:

Size: 660/720/820/920/1020/1050x2150

Thickness: 2.8MM, 3MM, 4.2MM

Material: HDF

Door skin

Door Skin,Veneer Door Skin,Wood Door Skin,Door Panel Skins

Luli Group Co.,Ltd. , https://www.cnluli.com