Automatic Swing Barrier, Pedestrian Access Control Gates
A Semi-Flush Mount is a type of Lighting Fixture that is installed on the
ceiling and hangs down slightly, but not as far as a Pendant Light. It
is a popular choice for rooms with low ceilings, as it provides ample
Lighting Product without taking up too much vertical space. Semi-Flush Mount Lighting come
in a variety of styles and designs, from modern and sleek to more
traditional and ornate. Semi-Flush Light are typically easy to install and can be
used in a variety of settings, including bedrooms, living rooms, and
kitchens.
Compared with Flush Mount lamps, there are no special restrictions on the design of Semi-flush Mount due to a certain vertical space, so there will be more changes in the structure. Can be with a chain, can be used boom. In the Normal Temperature test, it is stipulated that the distance between the bulbs or lampshade area and the canopy or ceiling in Semi-flush Mount is within 4 inches, which needs to make the Normal Temperature test, and whether to post a temperature warning depends on the temperature. If the distance is greater than 4 inches, Normal Temperature test is not required.
Semi-Flush,Semi-Flush Mount,Semi-Flush Light,Semi Flush Mount,Semi-Flush Mount Lighting,Ceiling Mount Lighting,Ceiling Flush Mount Light Fixture,Led Ceiling Flush Mount Light Zhengdong Lighting Co., Ltd. , https://www.zdlightingfixture.comAutomatic Swing Barrier , Pedestrian Access Control Gates
Swing barrier systems provide effective means for pedestrian flow control at entrances of production facilities, administrative buildings, company offices, schools, university campuses, stadiums, leisure and fitness facilities, amusement parks and zoos, shopping outlets.
 Quick Details
Features
Â
1.Equipped with standard input/output signal interface, can be integrated with all types of access control panel, offering complete entrance control solutions.
2. Bi-directional passing or single way passing. 3.Equipped with LED directional indication / status lights.
4.The equipment's running state can be programmed by the built-in small visual panel on the master control board.
5.In the case of power failure, the rotating arms open automatically to ensure unblocked access.
6.Mechanical structure can prevent operators from being clamped or wounded. As a rotating arm is blocked in the process of reset, the motor will stop working within the specified time. The arm will reset again (until it is reset) after defaulted time delay and the strength is small (≤2Kg).
7.Rotating arm is locked automatically before receiving an opening signal.
8. Automatic reset: if a person fails to pass within the specified time after the turnstile is opened, the system will cancel authorization of this access automatically;
9.Highly durable design ensures the life span more than 5 million cycles.
Â
