Specification:
CT-203A: Â 5/8",3/4",7/8",1-1/8"
CT-203M: 16mm,19mm,22mm,28mm
How To Use
- Insert tubing into adjustable opening of tube holding assembly . Position end of tubing approximately 1/8" above the surface of holder .
- Tighten clamp screw approximately 1/2 to 3/4 of a turn beyond free travel position to secure tubing .
- Be certain flaring cone surface is oiled . Slip yoke over tube holding assembly centering on tubing . Twist yoke clockwise to lock in position . Turn yoke handle clockwise to flare .
- For use with soft copper , aluminum and brass tubing . Faceted , hard chrome-finished cone rolls out perfect 45° flares above die block-then automatically burnishes flare face . Original wall thickness is maintained at base of flare . New slip-on yoke permits use in tight quarters where there is little space between nut and tube end . Larger handle , with better leverage , and precision threads on feed screw make flaring effortless . Heat treated dies firmly grip tubing . Satin chrome and black finish .
| Item No. | Name | Size | QTY/CTN (PCS) |
| CT-103A | Common Flaring Tool | 45° 7/8",1", 1-1/8" | 10 |
| CT-103M | Common Flaring Tool | 45° 22mm,25mm,28mm | 10 |
| CT-203A | Common Flaring Tool | 45° 5/8",3/4",7/8",1-1/8" | 10 |
| CT-203M | Common Flaring Tool | 45° 16mm,19mm,22mm,28mm | 10 |
| CT-190A | Common Flaring Tool | 45° 3/16",1/4",5/16",3/8",7/16",1/2",5/8" | 20 |
| CT-190M | Common Flaring Tool | 45° 5mm,6mm,8mm,10mm,12mm,14mm,16mm | 20 |
| CT-191A | Common Flaring Tool | 45° 3/16",1/4",5/16",3/8",7/16",1/2",5/8" | 20 |
| CT-191M | Common Flaring Tool | 45° 5mm,6mm,8mm,10mm,12mm,14mm,16mm | 20 |
| CT-195A | Common Flaring Tool | 45° 3/16",1/4",5/16",3/8",7/16",1/2",5/8" | 20 |
| CT-195M | Common Flaring Tool | 45°  4mm,6mm,8mm,10mm,12mm,14mm,16mm | 20 |
| CT-525 | Grabber  Flaring Tool |  3/16" ~ 5/8"(5-16mm) | 20 |
| CT-526 | Grabber  Flaring Tool |  3/16" ~ 3/4"(5-19mm) | 20 |
| CT-806A | Eccentric  Flaring Tool | 45°Eccentric cone,1/4",5/16",3/8",1/2",5/8",3/4" | 10 |
| CT-806M | Eccentric  Flaring Tool | 45°Eccentric cone,6mm,8mm,10mm,12mm,16mm & 19mm | 10 |
| CT-808A | Eccentric  Flaring Tool | 45°Eccentric cone,3/16",1/4",5/16",3/8",1/2",5/8",3/4" | 10 |
| CT-808M | Eccentric  Flaring Tool | 45°Eccentric cone,5mm,6mm,8mm,10mm,12mm,16mm & 19mm | 10 |
Specification:
CT-203A: Â 5/8",3/4",7/8",1-1/8"
CT-203M: 16mm,19mm,22mm,28mm
How To Use
- Insert tubing into adjustable opening of tube holding assembly . Position end of tubing approximately 1/8" above the surface of holder .
- Tighten clamp screw approximately 1/2 to 3/4 of a turn beyond free travel position to secure tubing .
- Be certain flaring cone surface is oiled . Slip yoke over tube holding assembly centering on tubing . Twist yoke clockwise to lock in position . Turn yoke handle clockwise to flare .
- For use with soft copper , aluminum and brass tubing . Faceted , hard chrome-finished cone rolls out perfect 45° flares above die block-then automatically burnishes flare face . Original wall thickness is maintained at base of flare . New slip-on yoke permits use in tight quarters where there is little space between nut and tube end . Larger handle , with better leverage , and precision threads on feed screw make flaring effortless . Heat treated dies firmly grip tubing . Satin chrome and black finish .
| Item No. | Name | Size | QTY/CTN (PCS) |
| CT-103A | Common Flaring Tool | 45° 7/8",1", 1-1/8" | 10 |
| CT-103M | Common Flaring Tool | 45° 22mm,25mm,28mm | 10 |
| CT-203A | Common Flaring Tool | 45° 5/8",3/4",7/8",1-1/8" | 10 |
| CT-203M | Common Flaring Tool | 45° 16mm,19mm,22mm,28mm | 10 |
| CT-190A | Common Flaring Tool | 45° 3/16",1/4",5/16",3/8",7/16",1/2",5/8" | 20 |
| CT-190M | Common Flaring Tool | 45° 5mm,6mm,8mm,10mm,12mm,14mm,16mm | 20 |
| CT-191A | Common Flaring Tool | 45° 3/16",1/4",5/16",3/8",7/16",1/2",5/8" | 20 |
| CT-191M | Common Flaring Tool | 45° 5mm,6mm,8mm,10mm,12mm,14mm,16mm | 20 |
| CT-195A | Common Flaring Tool | 45° 3/16",1/4",5/16",3/8",7/16",1/2",5/8" | 20 |
| CT-195M | Common Flaring Tool | 45°  4mm,6mm,8mm,10mm,12mm,14mm,16mm | 20 |
| CT-525 | Grabber  Flaring Tool |  3/16" ~ 5/8"(5-16mm) | 20 |
| CT-526 | Grabber  Flaring Tool |  3/16" ~ 3/4"(5-19mm) | 20 |
| CT-806A | Eccentric  Flaring Tool | 45°Eccentric cone,1/4",5/16",3/8",1/2",5/8",3/4" | 10 |
| CT-806M | Eccentric  Flaring Tool | 45°Eccentric cone,6mm,8mm,10mm,12mm,16mm & 19mm | 10 |
| CT-808A | Eccentric  Flaring Tool | 45°Eccentric cone,3/16",1/4",5/16",3/8",1/2",5/8",3/4" | 10 |
| CT-808M | Eccentric  Flaring Tool | 45°Eccentric cone,5mm,6mm,8mm,10mm,12mm,16mm & 19mm | 10 |
1. Farm Fence: This is a type of fence that is used on farms to keep animals in specific areas and prevent them from wandering off. It is usually made from wood, metal, or a combination of both.
2. Galvanized Wire Fence: This is a type of fence made from steel wire that has been coated with a layer of zinc to prevent rusting and corrosion. It is commonly used in agricultural settings due to its durability and strength.
3. Farm Fence Wire: This is a type of wire that is specifically designed for use in farm fences. It is usually made from high-tensile steel, which is strong and resistant to stretching. It can be used to create a variety of fence types, including Barbed Wire, woven wire, and electric fences.
4. Horse Fence Wire: This is a type of wire fence that is specifically designed for use with horses. It is usually made from high-tensile steel and is designed to be safe and effective at keeping horses contained. It is often coated with a smooth material to prevent horses from getting injured if they come into contact with the fence.
Farm Fence,Galvanized Wire Fence,Farm Fence Wire,Horse Fence Wire
Hebei Aibuer trading co., Ltd , https://www.ablewiremesh.com