Feeder common problems and their handling opinions

Lihao



In the use of the feeder, you will definitely encounter various problems, the following are the common problems of the feeder and the corresponding solutions.

One: the feeder is vibrating during operation

Reasons: 1. The raw material is too curved 2. The raw material is not chamfered 3. The center dislocation

Countermeasures: 1. Try to buy straight materials. 2. Material tail chamfer 3. Recalibration center

Two: can not start

Cause: The power supply is not connected. Check whether the power is connected.

Three: insufficient pressure

Reasons: 1. The hydraulic oil is insufficient 2. The motor is working normally. 3. The filter is clogged 4. The seal is damaged.

Countermeasures: 1. Replenish hydraulic oil 2. Check the line connection 3. Replace the filter core 4. Replace the seal ring

Four: the bar cannot enter the feeder when refueling

Cause: The back-off time setting is too short and the push rod cannot be completely returned to the end of the tube.

Countermeasure: long press the “Settings” button, then press “Add” to increase the back time, then press the “Settings” button twice to return to the working state.

Five: the feeder does not send the material after the delivery (back) / early warning

Reasons: 1. The pressure is not enough. 2. The position of the material tube is incorrect. 3. Is the motor working normally?

Countermeasures: 1. Check the amount of oil 2. Move the pipe slightly. 3. Check the line.

Danger - can cause serious injury. Please be extra careful

1. Incorrect adjustment may cause the feeder to malfunction or the machine to be damaged.

2. Do not touch the mechanical power unit with any part of the body while the equipment is in operation.

3. Mechanical repair and maintenance can only be carried out without pressure after the power is turned off.


Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn

Gas Instant Water Heater,Flue Type Gas Water Heater,Lower Pressure Water Junker Gas Water Heater Manufacturer in China

the housing material is stainless steel ,it is also very easy to clean it as well .

Gas Instant WATER HEATER ,FLUE TYPE GAS WATER HEATER,Lower Pressure Water Junker Gas Water Heater , Lgp Force Exhaust Type

we will give best price and good quality to customers from different country .

China Gas Instant Water Heater ,Flue Type Gas Water Heater manufacturer, choose the high quality Lower Pressure Water Junker Gas Water Heater,Lgp Force Exhaust Type, etc.

FLUE TYPE GAS WATER HEATER

Gas Instant Water Heater,Flue Type Gas Water Heater,Lower Pressure Water Junker Gas Water Heater,Lgp Force Exhaust Type

GUANGZHOU AIJINGSI TRADING LIMITED , https://www.aichugashob.com