How to remove the spherical door lock ball lock installation considerations
The style of the spherical door lock is still relatively common. In daily life, spherical and handle-type door locks and smart door locks are more common, and each type of door lock removal method is different. Everyone is talking about how to open the spherical door lock , take a look at how to open the ball lock and related knowledge introduced it! Ball Lock Introduction Ball lock The inner and outer handles (lock handles) are spherical and are used for door locks installed on wooden doors, steel doors, aluminum alloy doors and plastic doors. 2. Product classification From the product point of view, the structure of the lock head is divided into a pin ball lock and a leaf ball lock. The products are classified into cylinder locks, three-ball locks, fixed locks, and pull-locks according to the lock body structure; the lock device is divided into buttons, knobs, and knobs. How to remove the spherical door lock Tools components to be prepared: Cordless electric screwdrivers, screwdrivers, ball lock assemblies 1. Use the iron fittings inside the ball lock fittings to remove the grip and insert it into the hole under the handle. 2. According to the previous step, the grip can be easily unscrewed. 3, use a screwdriver to pick up the rear gasket. 4. Use a cross screwdriver or electric screwdriver to loosen the screws in the ball lock. 5. Remove the old ball lock from the other side of the ball lock. 6. Use electric screwdriver or cross screwdriver to remove the lock bolt. 7. Using the same method as in step one, remove the new one of the ball lock assembly grips. 8. Remove the fixed lock and gasket of the ball lock. 9, first install the lock bolt, then insert the ball lock, and test whether the cassette is accurately engaged. 10. Use electric screwdriver or screw to install the fixed locking piece. 11. Put on the ball lock and handle the gasket. 12, set of ball locks can be pressed into the back. In general, the main difference of the ball lock is the length from the lock, one is 60mm, and the other is 85mm, so please pay attention to the difference in specifications when changing. Ball lock installation precautions First of all, we must strictly follow the open hole diagram to install the size to open the hole. If the hole is too small, it will easily cause the door lock and the circuit board to be deformed. As a result, after the installation is completed, the door lock will not work properly, resulting in a variety of Occurrence of the phenomenon, the hole should be careful, can not open the hole or crack the door if the hole is too large will cause the lock body can not cover the hole, seriously affecting the overall appearance. The above is how to remove the spherical door locks. What kind of locks are used in your home? Hope that the above introduction can help everyone. If you want more information, please continue to pay attention to this site. Please look forward to! Door lock anti-theft door lock how to change the bedroom door lock Tantalum Tubes,Tantalum Dish,Tantalum Rods,Tantalum Sheet Baoji Yongshengtai Titanium Industry Co., Ltd. , https://www.bjystititanium.com
