Production points that should be paid attention to in the work of desulfurization gypsum ball press
The production points that should be paid attention to in the work of desulfurization gypsum ball press. The desulfurization gypsum ball press can be used for the desulfurization of gypsum, lime and other materials. For environmental protection and energy conservation, waste has unique characteristics. However, although the desulfurization gypsum ball press is good, it is still necessary to pay attention to the production points that should be paid attention to during work. The following technical briefs of Xutian Tiancheng will be introduced for you. Preventing such problems from continuing to be encountered in future work will affect work efficiency. Production points that should be paid attention to in the work of desulfurization gypsum ball press. I. The pressure roller material of the desulfurization gypsum ball press machine is also prone to breakage. The poor pressure of the press roller material affects the pressure ball operation of the equipment, so the purchase of desulfurization gypsum pressure ball When the machine is in use, it must be seen whether the material of the desulfurization gypsum ball press machine is a good metal alloy material, and a good material can extend the life cycle of the parts. Second, the pressed material can not be mixed with any impurities: the desulfurized gypsum pulled back from the power plant, to ensure that the gypsum can not have any dopants, such as: iron filings, nails, hard metal, if economic conditions permit A drum screen can be used to screen the materials first, or a metal detecting device can be added at the feeding port to separate the materials of the non-pressure ball in advance. After the selected desulfurized gypsum, the automatic feeding machine can be used to enter the ball pressing machine. In the case of too much material, the pressing roller may be damaged. It can greatly improve our production efficiency. Third, the manufacturer's workers guarantee responsibility and care in the work. Before going to work, check whether the desulfurization gypsum pressure roller is loose. If the pressure roller deviates, it does not correspond, and it is easy to cause the pressure roller to break. There is a deviation of the pressure roller, loose, can be stopped, re-installed, in the start-up operation, after each work, the ball socket of the pressure roller should be cleaned to ensure the cleaning of the pressure roller. The above is the production point that should be paid attention to in the work of the desulfurization gypsum ball press. Everyone should avoid such problems when using the desulfurization gypsum ball press. This will greatly improve our production and efficiency, and use the desulfurization gypsum ball press. In line with the national conditions advocated by the state for recycling and recycling, it is conducive to environmental protection. Therefore, investing in desulfurization gypsum ball press is a good choice. Friends who need it can contact us and contact us. Http://news.chinawj.com.cn 100 Feet Photoluminescent Exit Sign Luminescent Signage,100 Feet Photoluminescent Exit Sign,Afterglow Super Sign,Afterglow Tape JINAN REALGLOW CO.,LTD , https://www.realglowsign.com