Simple installation method of electric hoist sliding wire

Slide wires, trolley wires, slide wires, and electric hoist slide wires are all important devices for slide wires and slide wires. Here we talk about the installation method of electric hoist sliding line.
Electric hoist sliding line, trolley line in cement and other building materials companies are widely used. Here we introduce a simple and practical installation method. In general, the slide wire and the trolley wire of the electric hoist are all installed on the U-shaped rails, and they are rigorously secured with wire ropes of q~10mm steel wire or round steel. The two rings are interlocked on the sliding ring. The steering ring is connected with bolts and can be rotated freely. One end of a steering ring is sleeved on a steel cable, and one end of a plurality of sliding rings is threaded onto the steel cable and fixed. The front end is connected to the motor and is free to move. The rear end is connected to the power supply. With the steering ring as the center, the traction cable is moved linearly or circularly. The above method can also be used if it is a straight track.
The above is just a relatively simple method that can eliminate problems such as poor contact and open circuit. It has been widely used and there are no problems. It is everyone who installs the electric hoist slide wire.

Smco2:17 magnet is also named Sm2Co17. Prorated with metallic samarium, cobalt, copper, iron and zirconium, are firstly those roughcasts with different properties and grades after  series technology processing from melting, milling, pressing to sintering in order. The (BH)max ranges from 20 to 32 MGOe, and maximum working temperature is 350 ℃. Sm2Co17 bears a extremely low temperature coefficient and preferably anti-causticity. In high temperature condition, the magnetic properties is better than NdFeB magnets. As a result, it's widely used in fields of aeronautics and space, national defense and sensors. As a result of  great brittleness of Sm2Co17 materials, it is not suitable for complex shapes and thin thickness disc or ring wall. Due to this character, there may be some appearance  defects such as small chips during production, inspection and magetizing process. However, it would not change its property. We consider them as qualified product. Magnetized Smco products must be picked up carefully and gently during assemble process and kept away from ironware to avoid mutually arracting, causing chips and cracks. Sm2Co17magnet is not easy to magnetize saturated, therefore, clients must be familiar with magnetization energy of their own magnetization equipments, to the effect that appropriate grade would be chose and products of company can be fully saturated.

Sm2co17 Magnet

Sm2Co17 Magnet,Super Rare Earth Smco Magnet Sm2Co17,Permanent Disc Sm2Co17 Motor Magnet

Jinyu Magnet (Ningbo) Co., Ltd. , https://www.magnetbonwin.com