Round blade lock _ use note
Since the lock cylinder of the circular blade lock adopts a springless blade structure, if a strong impact or vibration is received, the blade is liable to rotate freely within a rotation range of 90 degrees, and the key cannot be inserted. Therefore, when the safe and safe in the market are shipped from the factory, a plastic rod similar to the key is inserted into the blade lock hole to prevent the blade from rotating freely. Container House,Container Poor-House,Lodging House Prefabricated House,Steel Structure Co., Ltd. , http://www.wfsteelstructure.com
We should keep the plastic rods in use. When moving, transporting the safe (box) or when not using it for a long time, remember to insert the plastic rod into the lock hole. In this way, it is possible to prevent free rotation of the blade and prevent foreign matter from entering the keyhole.
Also keep in mind that the key is inserted in the direction of use: the key handle must be vertical, and the raised dot on the key handle (the key is correctly inserted into the direction mark) is above to insert the key into the keyhole. After confirming that the key has been fully inserted, turn the key clockwise to unlock it. Be sure not to open the key when the key is not inserted, forcibly unlocking the key, causing the key to jam in the lock cylinder to unplug or break the key. Also, the key cannot be pulled out during the rotation, and the key can only be pulled out after the key is turned counterclockwise.