Fiberglass Roving for Glass Reinforced Plastic
Introduction
E-Glass Assembled Roving are compatible with polyester, vinyl ester and epoxy resins.
1) E-glass direct rovings:Direct roving for filament winding, Direct roving for pultrusion,
   Direct roving for weaving, Direct roving for LFT and etc.
2) E-glass assembled rovings:Assembled for sprayup, Assembled roving for filament winding,
  Assembled roving for SMC, Assembled roving for chopping, Assembled roving for centrifugal
  casting,Assembled panel roving, Assembled roving for thermoplastics, Assembled roving for
  GMT and etc.
Technical data
Items:
Linear Density, tex
Resin Compatibility
Features
 1200-4800
UP, VE
For general purpose CSM
 2400
UP, VE,
For tissue mats
 2400
UP, VE
Low static, Good dispersion,
General roving for CSM
 2400
UP, VE, EP
For pipes
 2400
UP, VE, EP
For producing stitch mat, low static
Good dispersion and fast wet-out
Style
Linear
Density
(Tex)Filament
Diameter
(um)Moisture
Content
(%)Size
Content
(%)Breaking
Strength
(N|Tex)Roll
weightCompatible
resinApplication process
EC12-2400
2400
12
≤0.15
0.50±0.15
≥0.35
16|22
UP|VE
Continuous plates
EC12-4800
4800
12
≤0.15
0.50±0.15
≥0.35
16|22
UP|VE
Continuous plates
EC12-2400
2400
12
≤0.10
1.05±0.15
≥0.35
16|22
UP|VE
Spray up|chopping
EC12-4800
4800
12
≤0.10
1.05±0.15
≥0.35
16|22
UP|VE
Spray up|chopping
Note: can be customized
1.    Fiber linear density is stable, small deviations for tex.
2.    Less electrostatic accumulation, low fuzz.
3.    The fiber moderate stiffness, excellent dispensability.
4.    Good integrity with the concrete, good alkali resistance.
Application
Used to produce pipes of various diameters, storage tanks and tubes which are widely used in transportation, aerospace, military and electrical markets
Storage
Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C - 35°C, 35% - 65% respectively.
Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.
Package
Each spray up roving roll covering by shrinkage membrane or drawing membrane, then placed into cardboard box or set on pallet.Each pallet can stack 48 or 64 rolls .
each roll weight is 15~18kg.
It is can increasing roll weight according to customer requirements. Pallet stack shall no be higher than 2 layers, cardboard box shall no be higher than 5 layers
Guarantee
All of our products are Super Quality Level,resonable price and timely delivery ! We can guarantee you will be satisfied with our products.
If the items you received are not as our description or you are not satisfied with them, we will refund all the payment to you including shipping price.
we agree and accept to start with trials to get to know eachother, our super service will make you feel confident with us.
Fiberglass Roving for Glass Reinforced Plastic
Introduction
E-Glass Assembled Roving are compatible with polyester, vinyl ester and epoxy resins.
1) E-glass direct rovings:Direct roving for filament winding, Direct roving for pultrusion,
   Direct roving for weaving, Direct roving for LFT and etc.
2) E-glass assembled rovings:Assembled for sprayup, Assembled roving for filament winding,
  Assembled roving for SMC, Assembled roving for chopping, Assembled roving for centrifugal
  casting,Assembled panel roving, Assembled roving for thermoplastics, Assembled roving for
  GMT and etc.
Technical data
Items:
Linear Density, tex
Resin Compatibility
Features
 1200-4800
UP, VE
For general purpose CSM
 2400
UP, VE,
For tissue mats
 2400
UP, VE
Low static, Good dispersion,
General roving for CSM
 2400
UP, VE, EP
For pipes
 2400
UP, VE, EP
For producing stitch mat, low static
Good dispersion and fast wet-out
Style
Linear
Density
(Tex)Filament
Diameter
(um)Moisture
Content
(%)Size
Content
(%)Breaking
Strength
(N|Tex)Roll
weightCompatible
resinApplication process
EC12-2400
2400
12
≤0.15
0.50±0.15
≥0.35
16|22
UP|VE
Continuous plates
EC12-4800
4800
12
≤0.15
0.50±0.15
≥0.35
16|22
UP|VE
Continuous plates
EC12-2400
2400
12
≤0.10
1.05±0.15
≥0.35
16|22
UP|VE
Spray up|chopping
EC12-4800
4800
12
≤0.10
1.05±0.15
≥0.35
16|22
UP|VE
Spray up|chopping
Note: can be customized
1.    Fiber linear density is stable, small deviations for tex.
2.    Less electrostatic accumulation, low fuzz.
3.    The fiber moderate stiffness, excellent dispensability.
4.    Good integrity with the concrete, good alkali resistance.
Application
Used to produce pipes of various diameters, storage tanks and tubes which are widely used in transportation, aerospace, military and electrical markets
Storage
Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C - 35°C, 35% - 65% respectively.
Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.
Package
Each spray up roving roll covering by shrinkage membrane or drawing membrane, then placed into cardboard box or set on pallet.Each pallet can stack 48 or 64 rolls .
each roll weight is 15~18kg.
It is can increasing roll weight according to customer requirements. Pallet stack shall no be higher than 2 layers, cardboard box shall no be higher than 5 layers
Guarantee
All of our products are Super Quality Level,resonable price and timely delivery ! We can guarantee you will be satisfied with our products.
If the items you received are not as our description or you are not satisfied with them, we will refund all the payment to you including shipping price.
we agree and accept to start with trials to get to know eachother, our super service will make you feel confident with us.