Halogen lamp use precautions
(1) Before installing a halogen bulb, always ensure that the power is completely turned off. To protect the bulb from fingerprints or dirt, consider using a plastic sleeve when handling it. If your hands do come into contact with the bulb, clean it immediately with rubbing alcohol to prevent any damage. (2) Halogen bulbs are crafted from high-temperature resistant quartz glass. However, if they get oily residues from fingers or grease, this can lead to discoloration, clouding, and a reduction in brightness. Over time, this can also shorten the bulb's lifespan or cause the glass casing to crack. (3) During operation, the sealing points of a halogen bulb should ideally remain below 350 degrees Celsius. This ensures optimal performance and longevity. Proper ventilation and heat dissipation are crucial for maintaining these conditions, especially when the bulb is in use for extended periods. (4) Avoid directing cold air straight onto the bulb while it’s lit. Sudden changes in temperature can put unnecessary stress on the glass, potentially leading to cracks or other damage. (5) Halogen bulbs are sensitive to physical shocks and vibrations. Always handle them with care and avoid bumping or jarring the bulb once installed. (6) Even after turning off the bulb, the glass remains hot for some time. Wait until it has cooled down completely before attempting to clean or touch it. Handling a hot bulb can result in burns or permanent damage to its surface. film shooting light, led camera light panel, cine photography lighting EV LIGHT Guangzhou Co., Ltd , https://www.evlightpro.com