Slack 6-Channel Cap Combine Increases Productivity by 50%
Text / Director of Sales, Suzhou Slick Precision Equipment Co., Ltd. At present, the fastest basic cover system on the market has reached 9,000 caps/minute, and the fastest combination speed is only 3,000 caps/minute. In response to this market demand, Suzhou Slake Precision Equipment Co., Ltd. has recently developed a 6-channel can lid assembly. The HEXAD system, the HEXAD equipment, increases the speed of the combined punches to 4,500 caps per minute while increasing production capacity by 50%. Reducing Investment Capability Improvement With the increase of market demand, the capacity of base cover system has also been continuously improved. However, the combined speed of this combination has become the “stepping stone†of its overall production capacity. How can we help customers increase production efficiency and create higher prices? The value has become the focus of R&D for various equipment manufacturers. Leading the technological development The connection equipment related to the HEXAD equipment is basically the same as the connection equipment of the 4-channel equipment on the market. It only adds 2 channels, and can carry out some corresponding transformations on the basis of the original 4 channels to realize the 6-channel function. This will increase production capacity.
Flexibility is good , except of a geotextile's isolation , drainage , reinforcement , protective functiona , it is also impermeable .
1) One layer geotextile and one layer membrane ; Weight of base geotextile : 100g/m2-1000gm2 ; Thickness of geomembrane : 0.1mm-1.5mm .
2) Two layers geotextile and one layer membrane ; Weight of base geotextile : 80g/m2-600gm2 ; Thickness of geomembrane : 0.2mm-1.5mm .
3) One layer geotextile and two layers membrane ; Weight of base geotextile : 100g/m2-1000gm2 ; Thickness of geomembrane : 0.1mm-0.8mm .
4) Multi-layers : Weight of base geotextile : 100g/m2-1000gm2 ; Thickness of geomembrane : 0.1mm-1.5mm .
*Related Products:geocomposite,welded membrane.
Composite Geomembrane, Composite Geomembrane With Nonwoven Geotextile, Composite Hdpe Geomembrane Feicheng Lianyi Engineering Plastics Co., Ltd , https://www.lianyigeosynthetics.com
Slack 6-channel tank cover assembly diagram    Â
The equipment is put into use and will bring greater benefits to various high-yield single-cover and multi-cover beverages.
First of all, the customer wants to minimize the investment of the equipment under the premise of unchanged output, that is, the bigger the capacity of the equipment, the better. At present, the maximum production capacity of the basic cover system on the market has reached around 9000 caps/minute, while the fastest combination shutter speed is only 3,000 caps/minute. The configuration of a large-capacity production line is currently a set of basic covers that need to be equipped with 3 sets of combination punches. If the combined punch speed can be increased to 4500 cover/min, then the above production lines only need to configure 2 sets of combination punches. In this way, under the premise of equal production capacity, customers' equipment investment can be greatly reduced.
At present, there is no HEXAD-like product on the market at home and abroad. Slack's technology can be said to raise the level of this technology to a certain level and lead the development of technology in this field. Slack's recently developed 6-channel can lid combination punch system, 6-channel design, achieves a combined punch speed of 4,500 lids/minute. The fastest lid-cover system on the market is a 4-channel system with a speed of 3000. Cover/minute. HEXAD can increase production capacity by 50% under the premise that the energy consumption of equipment does not change much, but the price only increases by about 20%. The new equipment material has a higher utilization rate, which makes the production of the lid more energy-efficient and environmentally friendly. In addition, the utilization rate of the pull ring material will also increase by nearly 5%, which can greatly reduce the production cost of the customer's easy lid.
At the end of April this year, the equipment began trial operation in the company, and then verified the performance parameters such as system stability and product stability under the premise of 750 times per minute. At the same time, the customer was invited to visit the company and formally push the market. At present, potential customers already have business discussions with Slack.