The use of electric hydraulic lift maintenance knowledge

1) Before use, the equipment should be lifted once in the air to check if all parts are functioning properly. If any defects are found, stop using it immediately and perform necessary repairs. 2) During maintenance or cleaning of the lifting platform, make sure the safety brace is fully extended and locked in place to prevent accidental falls. 3) When the battery indicator shows less than 40%, charge it promptly. While charging, check the battery water level. If it's below 20ml, add distilled water to maintain proper levels. 4) Electrical and hydraulic systems must be maintained by trained professionals to ensure safety and efficiency. 5) After approximately two months of use (depending on usage frequency), apply grease to all rotating components to reduce wear and tear. 6) Inspect the hydraulic lifter pin monthly. If the set screw becomes loose, tighten it immediately to avoid the pin coming off, which could lead to serious accidents. 7) Keep the hydraulic oil clean and replace it every six months to ensure smooth operation of the system. 8) The equipment is suitable for both indoor and outdoor use. When used outdoors, it should be placed on a firm, stable surface to prevent tipping over. Adjust the chain screw and check the safety rope after every 20 uses. Avoid operating on slopes steeper than 30°, as this can cause the elevator to slide or fall. For self-propelled lifting platforms, maintaining good technical condition is essential for the smooth operation of construction companies. In hydraulically driven equipment, the performance of the hydraulic system directly reflects the machine’s overall health. High-quality hydraulic oil is crucial for reliable operation, and regular maintenance is the foundation of system durability. Based on practical experience, this document outlines key maintenance practices and precautions to ensure safe and efficient operation under typical working conditions. Regular inspections, timely repairs, and proper lubrication are vital to prolonging the life of the equipment and preventing unexpected failures.

Edge Fall Protection Fence

Construction building edge protection temporary security fence is a type of barrier used in construction sites to provide safety and security. This fence is designed to protect workers, visitors, and the general public from potential hazards such as falling debris, open trenches, and other dangerous construction activities.
These fences are typically made from strong, durable materials like steel or aluminium, and are designed to withstand harsh weather conditions and heavy impacts. They are also often brightly colored or marked with reflective materials to ensure they are highly visible.
The main purpose of these fences is to prevent unauthorized access to the construction site, helping to reduce the risk of theft, vandalism, and trespassing. They also serve to protect the surrounding environment from potential damage or contamination from construction activities.
In addition, these fences can also serve as a useful tool for managing traffic around the construction site, directing vehicles and pedestrians safely around the area.
Construction building edge protection temporary security fences are easy to install and dismantle, making them a cost-effective and practical solution for construction site safety and security. They can be easily adjusted or relocated as the construction project progresses.

Construction Building Edge Protection Temporary Security Fence

Hebei Aibuer trading co., Ltd , https://www.ablehardwares.com