Hotel anti-static floor acceptance Raiders

February 27, 2020

The number of modern hotels is increasing, and the hotel industry has a vast market. At the same time, the floors used in the renovation of hotels or hotels are also increasing in demand. In places such as hotels and factories, where there are a lot of people and machinery and equipment, people will install defenses. Static flooring. In general, the floor is checked after installing the anti-static floor. So how do you check the anti-static floor? Today's Meizhihe floor selection class will introduce the acceptance method of anti-static flooring.

First, we must ensure that there is no dust in the gap between the anti-static floor and the floor below, and the entire board is dust-free, clean, and has no remnants.
Second, the dislocation between the adjacent anti-static floor can not be greater than 1 mm, the edge of the floor to ensure that it is a straight line.
Third, the height difference between the anti-static floor should be less than 1 mm, this requirement is relatively high, but it has a great impact on the use and maintenance of anti-static floor in the future.
Fourth, the surface of the anti-static floor requires no scratches, no coating off, no damage to the edge of the floor.
Fifth, after the normal laying of the anti-static floor, we must be solid, walking on the top will not be shaking and ringing sound.

The quality of the hotel's anti-static floor is a vital issue, but the installation of the floor can't be ignored. Of course, the acceptance after installation is also an indispensable procedure. The Raiders about the completion of the installation of the floor is roughly the above points. If there is no problem with the above, it means that the construction team you selected is very serious and can be used with confidence.
High Temperature Alloy is divided into three kinds of material: 760 â„ƒ high-temperature material, 1200â„ƒ high temperature and 1500 â„ƒ high temperature materials, the tensile strength is 800 mpa. On other words,it refers to the metal material worked well in the condition of 760-1500 â„ƒ or above. It owns excellent high temperature strength, good resistance to oxidation and thermal corrosion resistance, good fatigue properties, fracture toughness and other comprehensive performance, this kind of material has became an irreplaceable key material in military and civilian gas turbine engine hot end components . According to the relevant theory, 760 â„ƒ high-temperature materials, according to the matrix elements,can be mainly divided into high temperature iron base alloy, nickel base superalloy and cobalt-based super alloy. According to the preparation process,it can be divided into deformation and high temperature alloy, casting high temperature alloy and powder metallurgy super alloy. According to the solid methods,it can be divided into solid solution strengthening, precipitation strengthening and oxide dispersion strengthened with fiber reinforced type, etc.

High Temperature Alloy
High Temperature Alloy,High Temperature Alloy Wire,High Temperature Alloy Anti-Corrosion ,High Temperature Tooling Tungsten Alloy
Jiangsu nickel alloy Co.,Ltd , https://www.xhalloy.com